MicroServer HPE ProLiant Gen10 870208-421-KTVYWZGL7FO | SEO | Sold

Item specifics HP 3WH7F3LRNL

• Brand HP
• Warranty 1 year
• Type MicroServer
• Processor AMD Opteron™ X3216 Processor (1.6-3.0GHz/2 compute cores/4 graphic cores/1MB/12-15W)
• POWER SOURCE One (1) 200 Watts non-hot plug, non-redundant
• Interface •USB 2.0 •USB 3.0•Network RJ-45 (Ethernet) 2•1 Rear VGA•2 Rear Display ports 1.2•3 total (2 rear, 1 internal)•4 total (2 rear, 2 front)
• Form Factor Ultra Micro Tower
• Memory Type HPE Standard MemoryDDR4 Unbuffered (UDIMM)
• Cache Memory 1MB (1 x 1MB) L2
• Memory Protection ECC
• Memory – Standard 8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
• Maximum Memory 32GB (2 x 16GB) PC4-2400T DDR4 UDIMM
• DIMM Slots Available 2
• Network / Network Controller Embedded Broadcom BCM5720 Dual Port Gbe LOM
• Expansion Slots •Expansion Slot: 1 •Technology: PCIe 3.0•Bus Width: X8•Connector Width: X8•Form Factor: Low Profile•Notes: Open-end connector to support up to x16 PCIe card ///•Expansion Slot: 2•Technology: PCIe 3.0•Bus Width: X1•Connector Width: X4•Form Factor: Low Profile•Notes: Open-end connector to support up to x16 PCIe card
• Storage Controller Embedded Marvell 88SE9230 PCIe to SATA 6Gb/s Controller
• Internal Storage Devices •Optical Drive – Optional: SATA DVD-RW drive, Optional: SATA SSD•Hard Drives – None ship standard
• Maximum Internal Storage Non-hot plug SATA 16TB (4 x 4TB) 3.5" SATA
• Industry Standard Compliance •ACPI V5.0 Compliant •PCIe 3.0 Compliant •PXE Support•WOL Support•EMC Class B •USB 2.0 •USB 3.0 •SATA 6Gb/s
• System Fans One (1) non-redundant system fan shipped standard
• Input Requirements •Rated Line Voltage 100 V AC to 240 V AC •Rated Input Current 3.5 A (at 100 V AC) •Rated Input Frequency 50 to 60 Hz •Rated Input Power200W Power Supply 244 W (at 115 V AC)
• Power Supply Output •Rated Steady-State Power 200 W Power Supply 200 W (at 100 VAC), 200 W (at 200 VAC)•Maximum Peak Power 200 W Power Supply 200 W (at 100 VAC), 200 W (at 200 VAC)
• Front View (External) •(2) USB 3.0 ports•(1) DVD-RW or (1) SATA SSD)•Front bezel lock/unlock indicators•Power on/Standby button and system power LED•Health LED•NIC status LED•Drive activity LED
• Front View (Internal) •Hard drive bays•Hard drive screws
• Rear View w (External) •(2) USB 2.0 ports•(2) USB 3.0 ports•NIC 1 port•NIC 2 port•Power jack•PCIe Gen3 slots•VGA port•(2) Display Ports 1.2
• Internal View (Rear) •DIMM •TPM•LFF/SFF SATA•SATA•System board power connector•System battery•Internal USB 2.0 port•Expansion slot 2, PCIe3 x4 (1)•Expansion slot 1, PCIe3 x8 (8, 4, 1)
• Temperature 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°Cper every 305 m (1.8°F per every 1000 ft) above sea level to a maximumof 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate ofchange is 20°C/hr (36°F/hr)
• Normative Standards CISPR32, EN55032, EN55024FCC CFR 47, Pt15; ICES-003; CNS13438; GB9254K32; K24; EN61000-3-2;EN61000-3-3;
• Configuration and Lightly loaded •CPU TYPE AND QUANTITY: AMD OPTERONTM PROCESSOR AT 15W CTDP X1 •DIMM TYPE, CAPACITY AND QUANTITY : 8 GB UDIMM 2400MT/S X1 •HDD TYPE AND QUANTITY: 2.5” SFF NHP HDD 500 GB X1 •IDLE SOUND POWER LEVEL IN BELS LWAD : 3.8 BELS •OPERATING SOUND POWER LEVEL IN BELS LWAD: 3.8 BELS •IDLE SOUND PRESSURE LEVEL LPAM: 26.0 DBA •OPERATING SOUND PRESSURE LEVEL LPAM: 26. DBA
• What's New AMD-based system with AMD Opteron™ X3000 series APUs• AMD Opteron™ X3216 for Entry BTO SKU• Higher maximum memory of 32GB DDR4 UDIMM• Support for one read-intensive SATA NHP SFF SSD• System default with 2x Display Ports 1.2• ClearOS preload on all BTO & Special SKUs with more or equal to one SATA HDD installed
• Total Size 23.5 x 23.0 x 25.4 cm (9.25 x 9.06 x 10.00 in)
• Weight 9.70 kg

Product Description HP H0K2QE914